TOTAL DEMINERALIZATION
PROFINE® YELLOW for total demineralization of incoming water, with cation and anion exchange resin. Filter for total salinity removal. Drinking water treated with Profine® Yellow is strictly prohibited.
TECHNICAL SPECIFICATIONS
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| Maximum flow rate | 1 l/min * | 1.5 l/min * | 2 l/min * |
| Autonomy | 250 l * | 400 l * | 500 l * |
| Operating pressure | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar |
| Temperature | Min. 4 Max. 30°C (40-86°F) |
Min. 4 Max. 30°C (40-86°F) |
Min. 4 Max. 30°C (40-86°F) |
*Flow rates and operating times calculated with an inlet water hardness of 10°f.
Exchange capacities can vary depending on the hardness of the incoming water and the flow rates.
DIMENSIONS
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| DIAMETER | 87.4 mm | 87.4 mm | 87.4 mm |
| HEIGHT (without headboard) | 270 mm | 385 mm | 530 mm |
| HEIGHT (with headboard) | 302 mm | 417 mm | 562 mm |
TOTAL DEMINERALIZATION
BIG PROFINE® YELLOW is part of a wide range of Profine® products tested and designed to meet every need. It is ideal for use in professional and industrial sectors where salt-free water is required.
The cartridge must be mounted vertically. Use 3/8" female connections with a flat gasket.
AIR CONDITIONING VALVE
The water filter activation process includes an initial phase called Conditioning. Conditioning is the initial rinsing process of the filter, necessary to bring it into ideal operating conditions. This initial rinse ensures complete cleanliness of all the filter media inside and the circuit itself. Conditioning should only be performed during the first activation of the cartridge. This operation can last from a few seconds to a few minutes. It is recommended to perform it even after the filter has been inactive for extended periods. Instructions on how many liters to dispense for proper conditioning can be found in the product data sheets.
TECHNICAL SPECIFICATIONS
| BIG 2.0 | BIG 3.0 | BIG 4.5 | BIG 6.0 | |
|---|---|---|---|---|
| Maximum flow rate | 2.2 l/min * | 3.3 l/min * | 5 l/min * | 6.5 l/min * |
| Autonomy | 550 l * | 800 l * | 1,200 l * | 1,600 l * |
| Operating pressure | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar |
| Temperature | Min. 4 Max. 30°C (40-86°F) |
Min. 4 Max. 30°C (40-86°F) |
Min. 4 Max. 30°C (40-86°F) |
Min. 4 Max. 30°C (40-86°F) |
Autonomy calculated on water with a carbonate hardness of 10°KD
*Based on internal manufacturer testing
DIMENSIONS
| BIG 2.0 | BIG 3.0 | BIG 4.5 | BIG 6.0 | |
|---|---|---|---|---|
| LENGTH | 140 mm | 140 mm | 180 mm | 180 mm |
| DEPTH | 140 mm | 140 mm | 177 mm | 175 mm |
| HEIGHT | 308 mm | 385 mm | 395 mm | 464 mm |
We recommend replacing the filters at the end of their rated lifespan, or if the outflow is too slow. Filters must be replaced within 365 days of installation. Before removing the filters, close the upstream water inlet and relieve the circuit pressure by opening the tap. To properly activate the filters, open the inlet valve and let water flow for at least five minutes before using it for drinking.
